Sign In | Join Free | My ccnmag.com
China OWO INTERNATIONAL TRADING CO.,LTD logo
OWO INTERNATIONAL TRADING CO.,LTD
DC Motor driver-DC motor-water pump-auto parts-Industrial electronics
Verified Supplier

3 Years

Home > Brushless DC Motor Driver >

JUYI JYQD_V6.3E2 DC Brushless Motor Drive Control Board No Hall 12V 24V 36V 500W DC 15A function demo board

OWO INTERNATIONAL TRADING CO.,LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

JUYI JYQD_V6.3E2 DC Brushless Motor Drive Control Board No Hall 12V 24V 36V 500W DC 15A function demo board

Brand Name : JUYI

Model Number : JYQD-V6.3E2

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : T/T,L/C,Paypal

Supply Ability : 1000sets/day

Delivery Time : 5-10 days

Packaging Details : PE bag+ carton

Working Voltage : 24V

Working current : 15A

Speed control : 0-5V

Speed pulse signal output : Yes

O.V / L.V protection : Yes

Color : Green

Contact Now

24VDC 3-phase BLDC motor PWM speed driver for sensorless BLDC motor JYQD-V6.3E2
Model numberJYQD-V6.3E2
Operating temp.-20—85℃
Operating voltage24V
Cont.working current15A
· PWM speed controlPWM frequency:1-20KHZ; Duty cycle 0-100%
Analog voltage speed regulation0-5V
O.V / L.V protectionInclude
Speed pulse signal outputInclude

Application notes:
1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.
2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)
3. JYQD-V6.3E2 driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 100W, it must add heatsink like the diagram as below.
4. The “Signal” terminal on the JYQD-V6.3E2 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.

Driver board diagram Driver board diagram with heatsink
Wiring diagram
5V -----Driver board internal output voltage
Signal ---- Motor speed pulse signal output port, 5V pulse signal.
1. Control port
Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
GND—Used for Drive board internal control
2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
GND----DC-
VCC----DC +
3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
4.Control port distance: 2.54mm,Power port distance:3.96 mm
5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
Dimensional drawing

China JUYI JYQD_V6.3E2 DC Brushless Motor Drive Control Board No Hall 12V 24V 36V 500W DC 15A function demo board wholesale

JUYI JYQD_V6.3E2 DC Brushless Motor Drive Control Board No Hall 12V 24V 36V 500W DC 15A function demo board Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: OWO INTERNATIONAL TRADING CO.,LTD
*Subject:
*Message:
Characters Remaining: (0/3000)